These general purpose full thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. It is made of low carbon steel, ASTM A29, 1010-1020. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type F ferrules are supplied.
Length | Part No. |
5/8″ | TT06-010-11 |
3/4″ | TT06-012-11 |
7/8″ | TT06-014-11 |
1″ | TT06-016-11 |
1-1/8″ | TT06-018-11 |
1-1/4″ | TT06-020-11 |
1-3/8″ | TT06-022-11 |
1-1/2″ | TT06-024-11 |
1-5/8″ | TT06-026-11 |
1-3/4″ | TT06-028-11 |
1-7/8″ | TT06-030-11 |
2″ | TT06-032-11 |
2-1/8″ | TT06-034-11 |
2-1/4″ | TT06-036-11 |
2-3/8″ | TT06-038-11 |
2-1/2″ | TT06-040-11 |
2-5/8″ | TT06-042-11 |
2-3/4″ | TT06-044-11 |
3″ | TT06-048-11 |
3-1/8″ | TT06-050-11 |
3-1/4″ | TT06-052-11 |
3-3/8″ | TT06054-11 |
3-1/2″ | TT06-056-11 |
4″ | TT06-064-11 |
4-1/8″ | TT06-066-11 |
4-3/4″ | TT06-076-11 |
5-1/8″ | TT06-082-11 |
5-1/2″ | TT06-088-11 |
6″ | TT06-096-11 |
6-1/8″ | TT06-098-11 |
6-1/2″ | TT06-104-11 |
8″ | TT06-128-11 |
8-1/8″ | TT06-130-11 |
8-1/2″ | TT06-136-11 |

TT06-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
5/16
Weld Fillet Diameter:
1/2
Weld Fillet Height:
1/8
Ferrule:
F