These general purpose full thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 3/16″ shorter after welding. Available in 302, 304, or 316 stainless steel, ASTM A493. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type F ferrules are supplied.
Length | Part No. |
1-1/2″ | TT12-024-12 |
1-3/4″ | TT12-028-12 |
1-7/8″ | TT12-030-12 |
2″ | TT12-032-12 |
2-3/16″ | TT12-035-12 |
2-1/4″ | TT12-036-12 |
2-3/8″ | TT10-038-12 |
2-1/2″ | TT12-040-12 |
3″ | TT12-048-12 |
3-3/16″ | TT12-051-12 |
3-1/2″ | TT12-056-12 |
3-11/16″ | TT12-059-12 |
4″ | TT12-064-12 |
4-3/16″ | TT12-067-12 |
4-1/2″ | TT12-072-12 |
5-3/16″ | TT12-083-12 |
6″ | TT12-096-12 |
6-3/16″ | TT12-099-12 |

TT12-XXX-12 Specifications
Material:
Stainless Steel
Stud Diameter (D):
3/4
Weld Fillet Diameter:
1-1/16
Weld Fillet Height:
1/4
Ferrule:
F