These general purpose full thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. It is made of low carbon steel, ASTM A29, 1010-1020. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type F ferrules are supplied.
Length | Part No. |
5/8″ | TT04-010-11 |
3/4″ | TT04-012-11 |
7/8″ | TT04-014-11 |
1″ | TT04-016-11 |
1-1/8″ | TT04-018-11 |
1-1/4″ | TT04-020-11 |
1-3/8″ | TT04-022-11 |
1-1/2″ | TT04-024-11 |
1-5/8″ | TT04-026-11 |
1-3/4″ | TT04-028-11 |
1-7/8″ | TT04-030-11 |
2″ | TT04-032-11 |
2-1/4″ | TT04-036-11 |
2-1/2″ | TT04-040-11 |
2-5/8″ | TT04-042-11 |
2-3/4″ | TT04-044-11 |
2-7/8″ | TT04-046-11 |
3″ | TT04-048-11 |
3-1/8″ | TT04-050-11 |
3-1/2″ | TT04-056-11 |

TT04-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
1/4
Weld Fillet Diameter:
23/64
Weld Fillet Height:
7/64
Ferrule:
F