TR10-XXX-12: TYPE TR 5/8-11 X “L” Reduced Base Weld Stud Stainless Steel

These general purpose reduced base studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.

Length is approximately 3/16″ shorter after welding. Available in 302, 304, or 316 stainless steel, ASTM a493.  Tru-Weld reduced base studs can be manufactured in any length above the standard minimum length of 5/8″.

Type F-Low Profile ferrules are supplied.

Length Part No.
1-1/2″ TR10-024-12
1-5/8″ TR10-026-12
2″ TR10-032-12
2-1/8″ TR10-034-12
2-1/2″ TR10-040-12
2-11/16″ TR10-043-12
2-3/4″ TR10-044-12
3″ TR10-048-12
3-1/2″ TR10-056-12


TR10-XXX-12 Specifications

Stainless Steel
Stud Diameter (D):
Base Diameter:
Base Length:
Weld Fillet Diameter:
Weld Fillet Height:
F-Low Profile