TR12-XXX-12: TYPE TR 3/4-10 X “L” Reduced Base Weld Stud Stainless Steel

These general purpose reduced base studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.

Length is approximately 3/16″ shorter after welding. Available in 302, 304, or 316 stainless steel, ASTM a493.  Tru-Weld reduced base studs can be manufactured in any length above the standard minimum length of 5/8″.

Type F-Low Profile ferrules are supplied.

Length Part No.
1-1/2″ TR12-024-12
1-3/4″ TR12-028-12
2″ TR12-032-12
2-3/16″ TR12-035-12
2-1/2″ TR12-040-12
2-11/16″ TR12-043-12
2-3/4″ TR12-044-12
3″ TR12-048-12
3-1/2″ TR12-056-12

TR12-XXX-12 Specifications

Stainless Steel
Stud Diameter (D):
Base Diameter:
Base Length:
Weld Fillet Diameter:
Weld Fillet Height:
F-Low Profile