These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. It is made of low carbon steel, ASTM A108 / A29, 1010-1020. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
Length | Part No. |
1″ | TP06-016-11 |
1-1/8″ | TP06-018-11 |
1-1/4″ | TP06-020-11 |
1-3/8″ | TP06-022-11 |
1-1/2″ | TP06-024-11 |
1-5/8″ | TP06-026-11 |
1-3/4″ | TP06-028-11 |
1-7/8″ | TP06-030-11 |
2″ | TP06-032-11 |
2-1/8″ | TP06-034-11 |
2-1/4″ | TP06-036-11 |
2-3/8″ | TP06-038-11 |
2-1/2″ | TP06-040-11 |
2-5/8″ | TP06-042-11 |
2-3/4″ | TP06-044-11 |
2-7/8″ | TP06-046-11 |
3″ | TP06-048-11 |
3-1/8″ | TP06-050-11 |
3-1/4″ | TP06-052-11 |
3-3/8″ | TP06054-11 |
3-1/2″ | TP06-056-11 |
3-5/8″ | TP06-058-11 |
3-7/8″ | TP06-062-11 |
4″ | TP06-064-11 |
4-1/8″ | TP06-066-11 |
4-1/4″ | TP06-068-11 |
4-5/8″ | TP06-074-11 |
4-3/4″ | TP06-076-11 |
5″ | TP06-080-11 |
5-1/8″ | TP06-082-11 |
5-3/8″ | TP06-086-11 |
5-5/8″ | TP06-090-11 |
6″ | TP06-096-11 |
6-1/8″ | TP06-098-11 |
6-1/2″ | TP06-104-11 |
6-5/8″ | TP06-106-11 |
7″ | TP06-112-11 |
7-1/2″ | TP06-120-11 |
7-5/8″ | TP06-122-11 |
8″ | TP06-128-11 |

TP06-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
3/8
Base Diameter:
.330
Base Length:
13/32
Weld Fillet Diameter:
7/16
Weld Fillet Height:
7/64
Ferrule:
P