These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. Available in 302, 304, or 316 stainless steel, ASTM A493. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
Length | Part No. |
3/4″ | TP06-012-12 |
1″ | TP06-016-12 |
1-1/8″ | TP06-018-12 |
1-1/4″ | TP06-020-12 |
1-3/8″ | TP06-022-12 |
1-1/2″ | TP06-024-12 |
1-5/8″ | TP06-026-12 |
1-3/4″ | TP06-028-12 |
1-7/8″ | TP06-030-12 |
2″ | TP06-032-12 |
2-1/8″ | TP06-034-12 |
2-1/4″ | TP06-036-12 |
2-3/8″ | TP06-038-12 |
2-1/2″ | TP06-040-12 |
2-5/8″ | TP06-042-12 |
2-3/4″ | TP06-044-12 |
2-7/8″ | TP06-046-12 |
3″ | TP06-048-12 |
3-1/8″ | TP06-050-12 |
3-1/4″ | TP06-052-12 |
3-3/8″ | TP06054-12 |
3-1/2″ | TP06-056-12 |
3-5/8″ | TP06-058-12 |
3-7/8″ | TP06-062-12 |
4″ | TP06-064-12 |
4-1/8″ | TP06-066-12 |
4-1/4″ | TP06-068-12 |
4-5/8″ | TP06-074-12 |
4-3/4″ | TP06-076-12 |
5″ | TP06-080-12 |
5-1/8″ | TP06-082-12 |
5-3/8″ | TP06-086-12 |
5-5/8″ | TP06-090-12 |
6″ | TP06-096-12 |
6-1/8″ | TP06-098-12 |
7″ | TP06-112-12 |
8-1/8″ | TP06-130-12 |

TP06-XXX-12 Specifications
Material:
Stainless Steel
Stud Diameter (D):
3/8
Base Diameter:
.330
Base Length:
13/32
Weld Fillet Diameter:
7/16
Weld Fillet Height:
7/64
Ferrule:
P