These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 3/16″ shorter after welding. It is made of low carbon steel, ASTMA108 / A29, 1010-1020. Tru-Weld partial thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
| Length | Part No. |
| 1-1/2″ | TP12-024-11 |
| 1-5/8″ | TP12-026-11 |
| 1-11/16″ | TP12-027-11 |
| 1-3/4″ | TP12-028-11 |
| 1-15/16″ | TP12-031-11 |
| 2″ | TP12-032-11 |
| 2-3/16″ | TP12-035-11 |
| 2-1/4″ | TP12-036-11 |
| 2-3/8″ | TP10-038-11 |
| 2-1/2″ | TP12-040-11 |
| 2-11/16″ | TP12-043-11 |
| 2-3/4″ | TP12-044-11 |
| 3″ | TP12-048-11 |
| 3-3/16″ | TP12-051-11 |
| 3-1/2″ | TP12-056-11 |
| 3-11/16″ | TP12-059-11 |
| 4″ | TP12-064-11 |
| 4-3/16″ | TP12-067-11 |
| 4-1/2″ | TP12-072-11 |
| 4-5/8″ | TP12-074-11 |
| 4-11/16″ | TP12-075-11 |
| 5″ | TP12-080-11 |
| 5-1/8″ | TP12-082-11 |
| 5-3/16″ | TP12-083-11 |
| 5-1/2″ | TP12-088-11 |
| 6″ | TP12-096-11 |
| 6-3/16″ | TP12-099-11 |
| 6-1/2″ | TP12-104-11 |
| 6-11/16″ | TP12-107-11 |
| 7-1/8″ | TP12-114-11 |
| 8″ | TP12-128-11 |
| 8-3/16″ | TP12-131-11 |
| 10-3/16 | TP12-163-11 |
TP12-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
3/4
Base Diameter:
.680
Base Length:
13/16
Weld Fillet Diameter:
3/4
Weld Fillet Height:
3/16
Ferrule:
P
