These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. It is made of low carbon steel, ASTM A108 / A29, 1010-1020. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrule are supplied.
| Length | Part No. |
| 3/4″ | TP05-012-11 |
| 7/8″ | TP05-014-11 |
| 1″ | TP05-016-11 |
| 1-1/8″ | TP05-018-11 |
| 1-1/4″ | TP05-020-11 |
| 1-3/8″ | TP05-022-11 |
| 1-1/2″ | TP05-024-11 |
| 1-5/8″ | TP05-026-11 |
| 1-3/4″ | TP05-028-11 |
| 1-7/8″ | TP05-030-11 |
| 2″ | TP05-032-11 |
| 2-1/8″ | TP05-034-11 |
| 2-1/4″ | TP05-036-11 |
| 2-1/2″ | TP05-040-11 |
| 3″ | TP05-048-11 |
| 3-1/8″ | TP05-050-11 |
TP05-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
5/16
Base Diameter:
.275
Base Length:
3/8
Weld Fillet Diameter:
13-32
Weld Fillet Height:
7/64
Ferrule:
P
