These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 3/16″ shorter after welding. It is made of low carbon steel, ASTM A108 / A29, 1010-1020. Tru-Weld partial thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
Length | Part No. |
1-1/4″ | TP10-020-11 |
1-3/8″ | TP10-022-11 |
1-1/2″ | TP10-024-11 |
1-5/8″ | TP10-026-11 |
1-3/4″ | TP10-028-11 |
1-7/8″ | TP10-030-11 |
2″ | TP10-032-11 |
2-1/8″ | TP10-034-11 |
2-1/4″ | TP10-036-11 |
2-3/8″ | TP10-038-11 |
2-1/2″ | TP10-040-11 |
2-5/8″ | TP10-042-11 |
2-11/16 | TP10-043-11 |
2-3/4″ | TP10-044-11 |
2-7/8″ | TP10-046-11 |
3″ | TP10-048-11 |
3-1/8″ | TP10-050-11 |
3-1/4″ | TP10-052-11 |
3-3/8″ | TP10-054-11 |
3-1/2″ | TP10-056-11 |
3-5/8″ | TP10-058-11 |
3-3/4″ | TP10-060-11 |
3-7/8″ | TP10-062-11 |
4″ | TP10-064-11 |
4-1/8″ | TP10-066-11 |
4-3/16″ | TP10-067-11 |
4-1/4″ | TP10-068-11 |
4-3/8″ | TP10-070-11 |
4-1/2″ | TP10-072-11 |
4-5/8″ | TP10-074-11 |
4-3/4″ | TP10-076-11 |
4-7/8″ | TP10-078-11 |
5″ | TP10-080-11 |
5-1/8″ | TP10-082-11 |
5-1/2″ | TP10-088-11 |
5-5/8″ | TP10-090-11 |
5-11/16″ | TP10-091-11 |
6″ | TP10-096-11 |
6-1/8″ | TP10-098-11 |
6-1/2″ | TP10-104-11 |
7″ | TP10-112-11 |

TP10-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
5/8
Base Diameter:
.562
Base Length:
5/8
Weld Fillet Diameter:
.695
Weld Fillet Height:
.185
Ferrule:
P