These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 3/16″ shorter after welding. Available in 302, 304, or 316 stainless steel, ASTM A493. Tru-Weld partial thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
Length | Part No. |
1-1/4″ | TP10-020-12 |
1-3/8″ | TP10-022-12 |
1-1/2″ | TP10-024-12 |
1-5/8″ | TP10-026-12 |
1-3/4″ | TP10-028-12 |
1-7/8″ | TP10-030-12 |
2″ | TP10-032-12 |
2-1/8″ | TP10-034-12 |
2-1/4″ | TP10-036-12 |
2-3/8″ | TP10-038-12 |
2-1/2″ | TP10-040-12 |
2-5/8″ | TP10-042-12 |
2-11/16 | TP10-043-12 |
2-3/4″ | TP10-044-12 |
2-7/8″ | TP10-046-12 |
3″ | TP10-048-12 |
3-1/8″ | TP10-050-12 |
3-1/4″ | TP10-052-12 |
3-3/8″ | TP10-054-12 |
3-1/2″ | TP10-056-12 |
3-5/8″ | TP10-058-12 |
3-3/4″ | TP10-060-12 |
3-7/8″ | TP10-062-12 |
4″ | TP10-064-12 |
4-1/8″ | TP10-066-12 |
4-3/16″ | TP10-067-12 |
4-1/4″ | TP10-068-12 |
4-3/8″ | TP10-070-12 |
4-1/2″ | TP10-072-12 |
4-5/8″ | TP10-074-12 |
4-3/4″ | TP10-076-12 |
4-7/8″ | TP10-078-12 |
5″ | TP10-080-12 |
5-1/8″ | TP10-082-12 |
5-1/2″ | TP10-088-12 |
5-5/8″ | TP10-090-12 |
5-11/16″ | TP10-091-12 |
6″ | TP10-096-12 |
6-1/8″ | TP10-098-12 |
6-1/2″ | TP10-104-12 |
7″ | TP10-112-12 |

TP10-XXX-12 Specifications
Material:
Stainless Steel
Stud Diameter (D):
5/8
Base Diameter:
.562
Base Length:
5/8
Weld Fillet Diameter:
.695
Weld Fillet Height:
.185
Ferrule:
P