These general purpose full thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 3/16″ shorter after welding. It is made of low carbon steel, ASTM A108 / A29, 1010-1020. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type F ferrules are supplied.
| Length | Part No. |
| 1-1/8″ | TT10-018-11 |
| 1-1/4″ | TT10-020-11 |
| 1-3/8″ | TT10-022-11 |
| 1-1/2″ | TT10-024-11 |
| 1-5/8″ | TT10-026-11 |
| 1-3/4″ | TT10-028-11 |
| 1-7/8″ | TT10-030-11 |
| 2″ | TT10-032-11 |
| 2-1/8″ | TT10-034-11 |
| 2-1/4″ | TT10-036-11 |
| 2-3/8″ | TT10-038-11 |
| 2-1/2″ | TT10-040-11 |
| 2-5/8″ | TT10-042-11 |
| 2-3/4″ | TT10-044-11 |
| 3″ | TT10-048-11 |
| 3-1/4″ | TT10-052-11 |
| 3-3/8″ | TT10-054-11 |
| 3-1/2″ | TT10-056-11 |
| 3-5/8″ | TT10-058-11 |
| 3-7/8″ | TT10-062-11 |
| 4-1/8″ | TT10-066-11 |
| 4-3/16″ | TT10-067-11 |
| 4-5/8″ | TT10-074-11 |
| 5-1/8″ | TT10-082-11 |
| 6-1/8″ | TT10-098-11 |
TT10-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
5/8
Weld Fillet Diameter:
7/8
Weld Fillet Height:
3/16
Ferrule:
F
