These general purpose full thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. It is made of 302, 304, or 316 stainless steel, ASTM A493. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type F ferrules are supplied.
| Length | Part No. |
| 5/8″ | TT06-010-12 |
| 3/4″ | TT06-012-12 |
| 7/8″ | TT06-014-12 |
| 1″ | TT06-016-12 |
| 1-1/8″ | TT06-018-12 |
| 1-1/4″ | TT06-020-12 |
| 1-3/8″ | TT06-022-12 |
| 1-1/2″ | TT06-024-12 |
| 1-5/8″ | TT06-026-12 |
| 1-3/4″ | TT06-028-12 |
| 1-7/8″ | TT06-030-12 |
| 2″ | TT06-032-12 |
| 2-1/8″ | TT06-034-12 |
| 2-1/4″ | TT06-036-12 |
| 2-3/8″ | TT06-038-12 |
| 2-1/2″ | TT06-040-12 |
| 2-5/8″ | TT06-042-12 |
| 2-3/4″ | TT06-044-12 |
| 3″ | TT06-048-12 |
| 3-1/8″ | TT06-050-12 |
| 4″ | TT06-064-12 |
| 4-1/8″ | TT06-066-12 |
| 4-5/8″ | TT06-074-12 |
| 5-1/8″ | TT06-082-12 |
| 4-1/8″ | TT06-066-11 |
| 4-3/4″ | TT06-076-11 |
| 5-1/8″ | TT06-082-11 |
TT06-XXX-12 Specifications
Material:
Stainless Steel
Stud Diameter (D):
5/16
Weld Fillet Diameter:
1/2
Weld Fillet Height:
1/8
Ferrule:
F
