These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 3/16″ shorter after welding. It is made of low carbon steel, ASTM A108 / A29, 1010-1020. Tru-Weld partial thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
Length | Part No. |
2-3/16″ | TP14-035-11 |
2-7/16″ | TP14-039-11 |
2-1/2″ | TP14-040-11 |
2-11/16″ | TP14-043-11 |
2-3/4″ | TP14-044-11 |
3-3/16″ | TP14-051-11 |
3-1/2″ | TP14-056-11 |
4-3/16″ | TP14-067-11 |
5-3/16″ | TP14-083-11 |
5-1/2″ | TP14-088-11 |
6-3/16″ | TP14-099-11 |
7-3/16″ | TP14-115-11 |
8-3/16″ | TP14-131-11 |
9-3/16 | TP14-147-11 |
10-3/16 | TP14-163-11 |
11-3/16″ | TP14-179-11 |
12-3/16″ | TP14-195-11 |

TP14-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
7/8
Base Diameter:
.798
Base Length:
7/8
Weld Fillet Diameter:
7/8
Weld Fillet Height:
1/4
Ferrule:
P