These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. Available in 302, 304, or 316 stainless steel, ASTM A493. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrule are supplied.
Length | Part No. |
3/4″ | TP05-012-12 |
7/8″ | TP05-014-12 |
1″ | TP05-016-12 |
1-1/8″ | TP05-018-12 |
1-1/4″ | TP05-020-12 |
1-3/8″ | TP05-022-12 |
1-1/2″ | TP05-024-12 |
1-5/8″ | TP05-026-12 |
1-3/4″ | TP05-028-12 |
1-7/8″ | TP05-030-12 |
2″ | TP05-032-12 |
2-1/8″ | TP05-034-12 |
2-1/4″ | TP05-036-12 |
2-1/2″ | TP05-040-12 |
3″ | TP05-048-12 |
3-1/8″ | TP05-050-12 |

TP05-XXX-12 Specifications
Material:
Stainless Steel
Stud Diameter (D):
5/16
Base Diameter:
.275
Base Length:
3/8
Weld Fillet Diameter:
13-32
Weld Fillet Height:
7/64
Ferrule:
P