These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. It is made of low carbon steel, ASTM A108 / A29, 1010-1020. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
| Length | Part No. |
| 3/4″ | TP04-012-11 |
| 7/8″ | TP04-014-11 |
| 1″ | TP04-016-11 |
| 1-1/8″ | TP04-018-11 |
| 1-1/4″ | TP04-020-11 |
| 1-3/8″ | TP04-022-11 |
| 1-1/2″ | TP04-024-11 |
| 1-5/8″ | TP04-026-11 |
| 1-3/4″ | TP04-028-11 |
| 1-7/8″ | TP04-030-11 |
| 2″ | TP04-032-11 |
| 2-1/4″ | TP04-036-11 |
| 2-1/2″ | TP04-040-11 |
| 2-3/4″ | TP04-044-11 |
| 3″ | TP04-048-11 |
| 3-1/2″ | TP04-056-11 |
| 4″ | TP04-064-11 |
| 4-1/4″ | TP04-068-11 |
TP04-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
1/4
Base Diameter:
.215
Base Length:
3/8
Weld Fillet Diameter:
5/16
Weld Fillet Height:
3/32
Ferrule:
P
