These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. It is made of low carbon steel, ASTM A108 / A29, 1010-1020. Tru-Weld partial thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
Length | Part No. |
7/8″ | TP08-014-11 |
1″ | TP08-016-11 |
1-1/8″ | TP08-018-11 |
1-1/4″ | TP08-020-11 |
1-3/8″ | TP08-022-11 |
1-1/2″ | TP08-024-11 |
1-5/8″ | TP08-026-11 |
1-3/4″ | TP08-028-11 |
1-7/8″ | TP08-030-11 |
2″ | TP08-032-11 |
2-1/8″ | TP08-034-11 |
2-1/4″ | TP08-036-11 |
2-3/8″ | TP08-038-11 |
2-1/2″ | TP08-040-11 |
2-5/8″ | TP08-042-11 |
2-3/4″ | TP08-044-11 |
2-7/8″ | TP08-046-11 |
3″ | TP08-048-11 |
3-1/8″ | TP08-050-11 |
3-1/4″ | TP08-052-11 |
3-3/8″ | TP08-054-11 |
3-1/2″ | TP08-056-11 |
3-5/8″ | TP08-058-11 |
3-3/4″ | TP08-060-11 |
3-7/8″ | TP08-062-11 |
4″ | TP08-064-11 |
4-1/8″ | TP08-066-11 |
4-1/4″ | TP08-068-11 |
4-1/2″ | TP08-072-11 |
4-5/8″ | TP08-074-11 |
4-3/4″ | TP08-076-11 |
5″ | TP08-080-11 |
5-1/8″ | TP08-082-11 |
5-1/2″ | TP08-088-11 |
5-5/8″ | TP08-090-11 |
6″ | TP08-096-11 |
6-1/8″ | TP08-098-11 |
6-1/2″ | TP08-104-11 |
7″ | TP08-112-11 |
8″ | TP08-128-11 |

TP08-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
1/2
Base Diameter:
.448
Base Length:
1/2
Weld Fillet Diameter:
19/32
Weld Fillet Height:
5/32
Ferrule:
P