These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 3/16″ shorter after welding. It is made of low carbon steel, ASTM A108 / A29, 1010-1020. Tru-Weld partial thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
| Length | Part No. |
| 2-1/4″ | TP16-036-11 |
| 2-1/2″ | TP16-040-11 |
| 2-3/4″ | TP16-044-11 |
| 3″ | TP16-048-11 |
| 3-1/4″ | TP16-052-11 |
| 3-1/2″ | TP16-056-11 |
| 4-1/4″ | TP16-068-11 |
| 5-3/4″ | TP16-092-11 |
| 6-1/8″ | TP16-098-11 |
| 6-1/4″ | TP16-100-11 |
| 7-1/4″ | TP16-116-11 |
| 7-1/2″ | TP16-120-11 |
TP16-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
1
Base Diameter:
.915
Base Length:
15/16
Weld Fillet Diameter:
1-1/8
Weld Fillet Height:
5/16
Ferrule:
P
