Mild Steel Partial Thread Stud
These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle. Length is approximately 1/8″ shorter after welding. It is made of low carbon steel, ASTM A29, 1010-1020. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Also available in:
Stainless Steel
| Diameter | Length | TRU-WELD Part Number | Base Diameter | Base Length | Weld Fillet Diameter | Weld Fillet Height | Ferrule Part Number |
|---|---|---|---|---|---|---|---|
|
1/4-20 |
3/4 |
TP04-012-11 |
.215 |
3/8 |
5/16 |
3/32 |
FER04-P |
|
5/16-18 |
3/4 |
TP05-012-11 |
.275 |
3/8 |
13/32 |
7/64 |
FER05-P |
|
3/8-16 |
3/4 |
TP06-012-11 |
.330 |
13/32 |
7/16 |
7/64 |
FER06-P |
|
1/2-13 |
7/8 |
TP08-014-11 |
.448 |
1/2 |
19/32 |
5/32 |
FER08-P |
|
5/8-11 |
1 |
TP10-016-11 |
.562 |
5/8 |
3/4 |
3/16 |
FER10-P |
|
3/4-10 |
1-3/16 |
TP12-019-11 |
.680 |
13/16 |
7/8 |
1/4 |
FER12-P |
|
7/8-9 |
1-11/16 |
TP14-027-11 |
.798 |
7/8 |
1 |
5/16 |
FER14-P |
|
1-8 |
1-11/16 |
TP16-027-11 |
.915 |
15/16 |
1-1/8 |
5/16 |
FER16-P |
