|
Welcome to Tru-Weld - A Division of Tru-Fit Products Corporation
Model TWP-1 Capacitor Discharge Pin Welder
 |
Product Description
The TWE-Pin Welder incorporates the latest solid state technology into a compact and rugged capacitor
discharge stud welder. This system has the capability to weld studs and pins (including cupped head pins) up to 10ga.
Operational and Safety Features
LED Voltage Meter
Safety Shutdown
Cooling Fan
Front-Panel
Informational LED's
Dial-down weld voltage control
Click Here to view/print the TWP-1 Spec Sheet
Click Here to view/print the TWP-1 Manual |
|
|
TWE-Pin Welder Features
- Digital DC Voltage read-out (allows for more accurate and repeatable weld settings).
- Cooling Fan for increased efficiency.
- Dial-down DC voltage settings (no need to turn off the unit when resetting to a lower voltage).
- Only 15 amp circuit requirement (unit fused at 15 amps).
- Terminal connections on capacitors are over 5/8" in diameter for a good seat of the terminal buss bars to increase reliability.
- Terminal connections on capacitor has 1/4-20 socket set screws inserted into each one. The socket set
screw is used to make the connection to the buss bars. This eliminates damaging the threads in the aluminum connections of the capacitor,
assuring a solid contact connection.
- Rigid internal construction connecting the the entire internal unit to the front and rear panels minimizes the
opportunity of the components coming loose during handling or operations.
- The TWE-Pin Welder weighs less than 11 pounds for ease of carrying.
- The TWE-Pin Welder is mounted in a rugged outer case for greater durability, texture, and appearance.
- CD Stud guns are ergonomically designed for better hand fit and comfort which reduces operator fatigue for increased weld repeatability.
- CD Stud guns have a permanent internal spring with easy adjustment for various spring pressures for applying the correct spring pressure to the weld.
- CD Stud guns can be configured for "B" collets, "CI" collets, Euro collets, or standard tapered chucks.
|
|
| TWP-1 Specs |
|
| Size |
10-5/8” x 9-11/16” x 6-7/8”
270mm x 246mm x 174mm |
| Weight |
10.6 lbs. |
| Weld Range |
Weld Pins - Up to 10 gauge
CD Studs - up to #10 |
| Duty Cycle |
16-20 studs per minute |
| Primary Power |
110 VAC @ 50/60Hz 15 amp circuit or 220 VAC @ 50/60Hz 7.5 amp circuit |
| Charge Voltage |
35-110 VDC |
|
|
Made in America
by Tru-Weld Equipment
(330)669-2773 Phone
(330)669-2473 Fax |
|
All Rights Reserved 2008 - TFP Corporation
Phone 330.725.7741 - Fax: 330.725.0161
P.O. Box 702 Medina, Ohio 44256 / 460 Lake Rd. Medina, Ohio 44256
Any questions about our site?
Contact the Webmaster
|
weld studs, stud welding, fasteners, welding, ferrules, weld, weld gun, concrete anchor,
decking shear connector, shear connector, arc studs, TT Stud, TP Stud, deformed bar anchor, cd stud, tr stud
collar stud, it stud, weld stud, shoulder stud, stack stud
|
