These general purpose full thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. It is made of low carbon steel, ASTM A29, 1010-1020. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type F ferrules are supplied.
| Length | Part No. |
| 5/8″ | TT08-010-11 |
| 3/4″ | TT08-012-11 |
| 7/8″ | TT08-014-11 |
| 1″ | TT08-016-11 |
| 1-1/8″ | TT08-018-11 |
| 1-1/4″ | TT08-020-11 |
| 1-3/8″ | TT08-022-11 |
| 1-1/2″ | TT08-024-11 |
| 1-5/8″ | TT08-026-11 |
| 1-3/4″ | TT08-028-11 |
| 1-7/8″ | TT08-030-11 |
| 2″ | TT08-032-11 |
| 2-1/8″ | TT08-034-11 |
| 2-1/4″ | TT08-036-11 |
| 2-3/8″ | TT08-038-11 |
| 2-1/2″ | TT08-040-11 |
| 2-5/8″ | TT08-042-11 |
| 2-3/4″ | TT08-044-11 |
| 3″ | TT08-048-11 |
| 3-1/8″ | TT08-050-11 |
| 3-1/4″ | TT08-052-11 |
| 3-3/8″ | TT08-054-11 |
| 3-1/2″ | TT08-056-11 |
| 4″ | TT08-064-11 |
| 4-1/8″ | TT08-066-11 |
| 4-3/4″ | TT08-076-11 |
| 5-1/8″ | TT08-082-11 |
| 5-1/2″ | TT08-088-11 |
| 6″ | TT08-096-11 |
| 6-1/8″ | TT08-098-11 |
| 6-1/2″ | TT08-104-11 |
| 8″ | TT08-128-11 |
| 8-1/8″ | TT08-130-11 |
| 8-1/2″ | TT08-136-11 |
TT08-XXX-11 Specifications
Material:
Mild Steel
Stud Diameter (D):
1/2
Weld Fillet Diameter:
11/16
Weld Fillet Height:
5/32
Ferrule:
F
