These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. Available in 302, 304, or 316 stainless steel, ASTM A493. Tru-Weld full thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
| Length | Part No. |
| 3/4″ | TP04-012-12 |
| 1″ | TP04-016-12 |
| 1-1/8″ | TP04-018-12 |
| 1-1/4″ | TP04-020-12 |
| 1-3/8″ | TP04-022-12 |
| 1-1/2″ | TP04-024-12 |
| 1-5/8″ | TP04-026-12 |
| 1-3/4″ | TP04-028-12 |
| 1-7/8″ | TP04-030-12 |
| 2″ | TP04-032-12 |
| 2-1/4″ | TP04-036-12 |
| 2-1/2″ | TP04-040-12 |
| 3″ | TP04-048-12 |
| 4″ | TP04-064-12 |
TP04-XXX-12 Specifications
Material:
Stainless Steel
Stud Diameter (D):
1/4
Base Diameter:
.215
Base Length:
3/8
Weld Fillet Diameter:
5/16
Weld Fillet Height:
3/32
Ferrule:
P
