These general purpose partial thread studs are used in all types of applications. They can be welded to a flat surface or to the inside or outside of an angle.
Length is approximately 1/8″ shorter after welding. Available in 302, 304, or 316 stainless steel, ASTM a493. Tru-Weld partial thread studs can be manufactured in any length above the standard minimum length of 5/8″.
Type P ferrules are supplied.
| Length | Part No. |
| 7/8″ | TP08-014-12 |
| 1″ | TP08-016-12 |
| 1-1/8″ | TP08-018-12 |
| 1-1/4″ | TP08-020-12 |
| 1-3/8″ | TP08-022-12 |
| 1-1/2″ | TP08-024-12 |
| 1-5/8″ | TP08-026-12 |
| 1-3/4″ | TP08-028-12 |
| 1-7/8″ | TP08-030-12 |
| 2″ | TP08-032-12 |
| 2-1/8″ | TP08-034-12 |
| 2-1/4″ | TP08-036-12 |
| 2-3/8″ | TP08-038-12 |
| 2-1/2″ | TP08-040-12 |
| 2-5/8″ | TP08-042-12 |
| 2-3/4″ | TP08-044-12 |
| 2-7/8″ | TP08-046-12 |
| 3″ | TP08-048-12 |
| 3-1/8″ | TP08-050-12 |
| 3-1/4″ | TP08-052-12 |
| 3-3/8″ | TP08-054-12 |
| 3-1/2″ | TP08-056-12 |
| 3-5/8″ | TP08-058-12 |
| 3-3/4″ | TP08-060-12 |
| 3-7/8″ | TP08-062-12 |
| 4″ | TP08-064-12 |
| 4-1/8″ | TP08-066-12 |
| 4-1/4″ | TP08-068-12 |
| 4-1/2″ | TP08-072-12 |
| 4-5/8″ | TP08-074-12 |
| 4-3/4″ | TP08-076-12 |
| 5″ | TP08-080-12 |
| 5-1/8″ | TP08-082-12 |
| 5-1/2″ | TP08-088-12 |
| 5-5/8″ | TP08-090-12 |
| 6″ | TP08-096-12 |
| 6-1/8″ | TP08-098-12 |
| 6-1/2″ | TP08-104-12 |
| 7″ | TP08-112-12 |
| 8″ | TP08-128-12 |
TP08-XXX-12 Specifications
Material:
Stainless Steel
Stud Diameter (D):
1/2
Base Diameter:
.448
Base Length:
1/2
Weld Fillet Diameter:
19/32
Weld Fillet Height:
5/32
Ferrule:
P
